Electrolux FM 7803 K-AN - Manual (Page 10)

Operating the appliance 10
Operating the appliance
3
Use the induction cooking zones with suitable cookware.
Switching the appliance on and off
3
After switching on, within approx. 10 seconds a heat setting or a function must
be set, otherwise the appliance automatically switches itself off.
Setting the heat setting
Switching the STOP+GO function on and off
The STOP+GO function simultaneously switches all cooking zones that are
switched on to the keep warm setting and then back to the heat setting that
was previously set.
3
Timer functions are not stopped by STOP+GO.
3
STOP+GO locks the whole control panel except the sensor field .
Control panel Display Pilot light
Switch on Touch for 2 seconds ¾ / h lights up
Switch off Touch for 1 second h / none goes out
Control panel Indicator
To increase Touch u to Ç
To decrease Touch Ç to ¾
To switch off Touch and at the same time ¾
Control panel Display
To switch on Touch u
To switch off Touch heat setting that was previously
set (not automatic warm up func-
tion)