Casio XJ-H2650 Wireless Function Guide - Manual (Page 32)

32
3.
Use the [ T] key to move the highlighting to “Change wireless connection” and
then press the [ENTER] key.
z This displays a dialog box like the one shown below for changing the wireless connection.
z Each of the connection names that appear on the dialog box corresponds to an SSID as
shown below.
z For details about MobiShow connection, see “Projecting from a Terminal with MobiShow
Installed” (page 42).
4.
Use the [ T] and [S] keys to move the highlighting to the connection name you
want to select and then press the [ENTER] key.
z This will cause a “Do you want to change the wireless connection?” confirmation dialog box to
appear.
5.
Press the [
S] key to move the highlighting to “Yes” and then press the [ENTER]
key.
z The wireless connection needs to be restarted in order to reflect the change, which will cause
the projected image to go blank. It may take a little time before the wireless screen is
projected again.
To display wireless information
1.
While the Wireless screen is being projected, press the [MENU] key.
2.
Use the [ T] key to move the highlighting to “USB” and then press the [ENTER]
key.
Connection Name SSID
Wireless Connection 1 casiolpj_default1
Wireless Connection 2 casiolpj_default2
Wireless Connection 3 casiolpj_default3
MobiShow Connection 1 casiolpj_mobishow1
MobiShow Connection 2 casiolpj_mobishow2
MobiShow Connection 3 casiolpj_mobishow3