Programming – Emerson 1F92 User Manual

Page 28

PROGRAMMING

MANUAL OPERATION

MANUAL OPERATION
Your Comfort-Set 90 thermostat can
be used to control temperature
manually (without programming).
For manual operation, press

SYSTEM

to select

HEAT

HEAT or COOL

COOL

COOL, then

press PROGRAM

HOLD

. Use

to set the tempera-

ture as desired.

PROGRAMMED OPERATION

PROGRAMMED OPERATION
Planning Your Program

Planning Your Program

Planning Your Program
The sample schedule (page 28)
shows the factory installed programs
for heating and cooling. The heating
and cooling programs are separate,
and must be programmed individu-
ally. To use the factory program, set
the clock and press PROGRAM

RUN

with the thermostat

SYSTEM

set to

Heat

Heat, Cool

Cool

Cool, or Auto

Auto

Auto.

Fill out the blank schedule (page 29)
with the time and temperatures you
want in your program. Fill in every
space for your program.

The same temperature can be
repeated more than once if you do
not want the temperature to change
over several time periods.

Entering Your Program

To Set the Clock

To Set the Clock:

1. Press PROGRAM

RUN

2. Press SET

TIME

. The display

will show the hour. Use TIME

FWD

or TIME

BACK

to set to the

current hour and AM/PM designa-
tion.

3. Press SET

TIME

again. The

display will show minutes. Use

TIME

FWD

or TIME

BACK

to set

to the current minutes.

4. Press PROGRAM

RUN

To Set the Day

To Set the Day:

5. Press SET

DAY

. The display

will indicate a day of the week. Use
TIME

FWD

or TIME

BACK

to set

to the current day of the week.

6. Press PROGRAM

RUN

To Set the Program

To Set the Program:

7. Press

SYSTEM

to select

HEAT

(for heating program) or

COOL

COOL (for

cooling program).

8. Press PROGRAM

VIEW

one

time. The display will show

MOR

MOR,

the settings for time and temperature
and

MON

MON, TUE, WED, THU, FRI.

TUE, WED, THU, FRI.