Emerson 1F92 User Manual

Page 24

TROUBLESHOOTING

TROUBLESHOOTING
RESET BUTTON

RESET BUTTON

If the thermostat does not respond
when keys are pressed, or the
thermostat is not operating properly,
you may use the reset button located
on the back of the thermostat body
(see fig. 2). Thermostat program-
ming and configuration will not be
affected by pressing the reset button.
However, the clock will need to be
reset.

RESETTING THERMOSTAT

RESETTING THERMOSTAT
CONFIGURATION AND

CONFIGURATION AND

CONFIGURATION AND
PROGRAMMING

PROGRAMMING

The thermostat can be reset back to
default programs and configuration.
Removing power from the thermo-
stat will not reset it, because the
default settings are maintained in
permanent memory. Before
resetting the thermostat, you may
want to make note of the previously
selected configuration and program-
ming. You must reconfigure and
reprogram the thermostat after
resetting it using this method.

To reset the thermostat, press and
release PROGRAM

RUN

, then

press the

FAN

, TIME

BACK

and

buttons at the same time. This

will reset the thermostat to factory
default programs and configuration.
The display will momentarily go
blank, then all segments on the
display will momentarily be shown.
The thermostat will then go into the
HOLD

HOLD

HOLD mode and will maintain
factory preset temperatures.