Elmo L-1EX - Manual (Page 53)

VARIOUS
FUNCTIONS
AND
OPERATIONS
English
Adjusting the brightness
P r e s s t h e [ B R I G H T N E S S ] o r
[ B R I G H T N E S S ] b u t t o n s o n t h e
operating panel or on the remote control to
adjust image brightness.The following two
adjustment modes can be set by selecting
[Brightness] from the OSD menu.
Automatic brightness adjustment
([Brightness]
→ [Auto] in the OSD)Brightness of the image
changes automatically according to the brightness of the
object.
Manual brightness adjustment
([Brightness]
→ [Manual] in the OSD)
The brightness of the image is fixed to the specified level.
■
■
N o t e
• Factory setting is set to [Auto].
• Manual adjustment fixes the brightness and does not adjust to changes in
brightness of the object.
• When the brightness becomes dark, the frame rate slows, and the image may
become hard to see.
• By setting [Guide] to [On] in the OSD menu, the setting details are displayed on the screen.
• To go back to the factory settings, press the [BRIGHTNESS
] and
[BRIGHTNESS ] buttons on the operating panel at the
same time, or set [Reset Brightness] from the OSD menu.
• In places where the object is exposed to bright sunlight
(e.g. near a window), or extremely bright lights, the
brightness of the screen may not dim sufficiently, even
when the [BRIGHTNESS
] button is pressed.
In such cases, adjust the amount of light by closing the
curtains or moving the source of the light.