Casio DT-X8 User Manual
Page 47
E-45
1
USB Client Port
This port is used to transmit system data and fi le data (download,
upload) by connecting the Cradle to a PC using a USB cable
(DT-380USB-A). A dedicated driver must be installed in the PC
before connecting the Cradle to the PC.
2
AC Adaptor Jack
Connect the AC adaptor (sold separately) here.
3
Power Switch
Turns the power on and off.
4
Power Supply/Data
Communication
Terminals
Power is supplied to the DT-X8 via these contacts. Also used for
data communication.
5
Terminal Detect
Switch
This switch detects when the DT-X8 is seated correctly on the
Cradle.
6
Mount Hooks
These hooks are used to stabilize the Handheld Terminal when
mounting it on the cradle.
7
Power Indicator
LED
This LED indicates the power status and the mounting status of
the DT-X8.
Off: DT-X8 is not installed.
Green: Power on, DT-X8 mounted correctly.
- 130CR (40 pages)
- 130CR (36 pages)
- 140CR (40 pages)
- DT-300M60E (27 pages)
- DT-810M50RC (46 pages)
- DT-970 (40 pages)
- DT-900 (53 pages)
- DT-X7 (75 pages)
- DT-X10 (62 pages)
- DT-X10 (61 pages)
- DT-5150B (1 page)
- DT-X30 (59 pages)
- EG-800 (55 pages)
- DT-10 (22 pages)
- PCR-272 Manual (46 pages)
- PCR-262 (40 pages)
- PCR-262 (44 pages)
- PCR-T280 (46 pages)
- PCR-T465 (92 pages)
- PCR-360 (88 pages)
- SE-S800 (102 pages)
- SE-S400 Manual (136 pages)
- SE-S3000 Manual (112 pages)
- PCR-1000 (96 pages)
- PCR-365A (98 pages)
- IT-300 (52 pages)
- IT-70 (63 pages)
- IT-2000D53E (56 pages)
- HA-D51TG (4 pages)
- HA-D62IO (2 pages)
- HA-D95HB (1 page)
- MPC-206E (145 pages)
- MPC-701 (160 pages)
- SE-S400 Quick Start (2 pages)
- QT-6000 (104 pages)
- SE-C2000 (110 pages)
- SE-S3000 Quick Start (2 pages)
- SE-S10 Quick Start (2 pages)
- SE-G1 (76 pages)
- SE-S10 Manual (48 pages)
- SE-S2000 (98 pages)
- SE-C6000 (134 pages)
- TK-3200 (118 pages)
- TE-M80 (40 pages)