Specifi cations – Casio DT-970 User Manual
Page 37
E-35
Important!
Always make sure to fi rst remove the 970 from the Ethernet Cradle when
switching the selector switch.
Water or other liquids on the data communication or power supply terminals can
lead to an electric shock or fi re. Note also that soiling on the terminals will impair
the connection, leading to reduced power supply and communication functionality.
As a safety precaution, disconnect the AC adapter before wiping the data
communication and power supply terminals clean with a dry cloth or cotton bud.
Never short out the power contacts of the Ethernet Cradle. This can damage the
Ethernet Cradle.
Do not subject the Handheld Terminal and Ethernet Cradle to vibration or
impact during communication. This can cause communication to be interrupted.
When loading the DT-970, fi t it securely in place and check that the green power
indicator LED on the front of the Ethernet Cradle is lit.
The DT-970 must be inserted correctly to draw power and communicate
successfully.
Always cap ports that are not being used. Using the Ethernet Cradle while the
ports are uncapped can cause damage.
Do not pick up the DT-970 while it is mounted in the Ethernet Cradle. Doing so
may result in the Ethernet Cradle being accidentally dropped, causing injury or
damage.
If the Ethernet Cradle will not be used for an extended period, set the power
switch to OFF.
Specifi cations
1. LAN Specifi cations
Communications protocol: IEEE 802.3
Media type:
10base-T/100base-TX auto-switched
2. USB
Protocol:
USB Ver2.0 Full speed
Transmission rate:
12Mbps (max.)
3. Power Supply
Power Source:
AC adaptor (AD-S42120C-N5)
Consumption Current:
12V DC approximately 0.3A
Output to Handheld Terminal: 5V DC 0.5A (max.)
USB Host Output:
5V DC 0.5A (max.)
4. AC Adaptor
Model: AD-S42120C-N5
Input:
100V to 240V AC 50/60Hz 1.2A
Output:
12V DC 3.5A
5. Dimensions and Weight
Dimensions:
Approximately 94(W)
× 84(D) × 107(H) mm
Weight: Approximately
280g
6. Operating Environment
Temperature:
0°C to 40°C (32°F to 104°F)
Humidity:
30% to 80% RH (non-condensation)
•
•
•
•
•
•
•
•