Casio CDP-220R - Manual (Page 9)

Send This message is not sent by this Instrument.
Receive This message is not received by this Instrument.
9 Control Change
Message Format: BnH ccH vvH
n: MIDI Channel Number
cc: Control Number
vv: Value
Send Sent when the Instrument’s pedal is operated or when Instrument settings are changed.
Receive Receipt changes the pedal and other performance conditions, and Instrument settings.
9.1 Bank Select (00H,20H)
Message Format: BnH 00H mmH (MSB)
BnH 20H llH (LSB)
n: MIDI Channel Number
mm: MSB Value(Note1)
ll: LSB Value(Send:00H, Receive:Ignored)
Note1 : For details about the relationship between the MSB value and the tone, see the Tone List that comes with the
Instrument.
Send Sent when a tone is selected.
Receive Receipt causes a change in the tone bank number stored in Instrument memory, but the
tone is not actually changed until a Program Change message is received. For details, see “11 Program
Change”.
9.2 Modulation (01H)
Message Format: BnH 01H vvH
n: MIDI Channel Number
vv: Value
Send This message is not sent by this Instrument.
Receive Receipt adds, to the tone being sounded, modulation of a depth specified by the value. In
the case of a tone that already has modulation applied, receipt of this message increases the modulation
depth. The modulation effect differs according to the tone being used.
9