Casio CDP-220R - Manual (Page 18)

18.1 Universal Real Time System Exclusive Message
Message Format: F0H 7FH....F7H
18.1.1 Master Volume
Message Format: F0H 7FH 7FH 04H 01H llH mmH F7H
ll: LSB Value(Send:00H, Receive:Ignored)
mm: MSB Value
Send This message is not sent by this Instrument.
Receive Receipt changes the Master Volume.
18.1.2 Master Fine Tuning
Message Format: F0H 7FH 7FH 04H 03H llH mmH F7H
ll: LSB Value(Note1)
mm: MSB Value(Note1)
Note1
:
For information about the relationship between setting values and send/receive values, see “33.4 Fine Tune Setting
Value Table” in “VII Setting Values and Send/Receive Values” of this document.
Send This message is sent when the tuning setting is changed.
Receive Receipt changes the tuning setting.
18.1.3 Master Coarse Tuning
Message Format: F0H 7FH 7FH 04H 04H llH mmH F7H
ll: LSB Value(Send:00H, Receive:Ignored)
mm: MSB Value
Send Sent when Transpose is changed.
Receive Receipt changes the Transpose parameter. Does not affect sound source operation when the
Timbre Type (see “About the Timbre Type” in “11 Program Change”) is Drum.
18.1.4 Reverb Time
Message Format: F0H 7FH 7FH 04H 05H 01H 01H 01H 01H 01H 01H vvH F7H
vv: Value(Note1)
Note1 : For information about the relationship between setting values and send/receive values, see “33.5 Reverb Time
Setting Value Table” in “VII Setting Values and Send/Receive Values” of this document.
Send Sent when the Reverb duration is changed.
18