beautypg.com

Recording to a usb flash drive (audio recorder) – Casio AP-650M User Manual

Page 41

background image

English

Recording Your Keyboard Play

E-39

Anything played on the Digital Piano is recorded to the
USB flash drive as audio data (WAV files*). If you play
along on the Digital Piano as you play back data stored
in song memory, the memory playback and your
keyboard play are both recorded to USB flash drive.

* Linear PCM, 16bit, 44.1 kHz, Stereo

Recording Capacity

99 files (No. 01 to No. 99)

Approximately 25 minutes maximum recording per
file

Recorded Data

Anything played on the Digital Piano is recorded.

Individual part recording is not supported.

Recording Data Storage

Each new recording of audio data to a USB flash drive
is automatically assigned a new file name, so existing
data is not overwritten.

Recording Digital Piano Play
(Audio Recorder)

PREPARATION

Be sure to format the USB flash drive on the Digital
Piano before using it. See “USB Flash Drive” on page
E-45 for more information.

1.

Insert the USB flash drive into the Digital
Piano’s USB flash drive port.

2.

Press the

ds

(AUDIO RECORDER) button

twice.

This will cause the AUDIO RECORDER button lamp
to flash.

3.

Start playing something on the keyboard.

This will start recording to the USB flash drive. The
message “A.Rec Start” will appear on the display a
few seconds after recording starts.

NOTE

Do not remove the USB flash drive from the USB
flash drive port while the AUDIO RECORDER
button lamp is lit or flashing. Doing so will interrupt
recording and may corrupt data.

4.

To stop recording, press the

ds

(AUDIO

RECORDER) button.

The AUDIO RECORDER button lamp will change
from flashing to lit to let you know that audio
recording is complete.

At this time, you can press the

bs

(PLAY/STOP)

button to replay what you have just recorded. To stop
playback, press the

bs

(PLAY/STOP)

button.

To exit the Audio Recorder, press the

ds

(AUDIO

RECORDER)

button so its lamp goes out.

Recording Digital Piano Play as Data
Recorded in Song Memory Plays Back
(Audio Recorder)

1.

Press the

4

(SONG RECORDER) button.

This causes the SONG RECORDER button lamp to
light.

2.

Press the

ds

(AUDIO RECORDER) button

twice so its lamp is flashing.

3.

Press the

bs

(PLAY/STOP) button.

This will start playback of the current song memory
contents. Play along on the Digital Piano.

4.

To stop recording, press the

ds

(AUDIO

RECORDER) button.

The AUDIO RECORDER button lamp will change
from flashing to lit to let you know that audio
recording is complete.

To exit the Audio Recorder, press the

ds

(AUDIO

RECORDER)

button so its lamp goes out.

Recording to a USB Flash
Drive (Audio Recorder)

This manual is related to the following products: