Recording or playing back multiple songs – Casio AP-650M User Manual
Page 36
E-34
Recording Your Keyboard Play
6.
To exit the Song Recorder, press the
4
(SONG RECORDER) button again so its
lamp goes out.
NOTE
•
Recorder memory capacity is approximately 10,000
notes per song. When remaining capacity is 100
notes or less, the
4
(SONG RECORDER)
button
lamp will flash at high speed. Recording will stop
automatically when memory becomes full.
•
Repeat, fast reverse, fast forward, pause, and tempo
adjustment during playback are the same as when
playing back user songs. See “Listening to Songs
Loaded from an External Source” (page E-23) for
more information.
•
You can listen to the song data currently stored in
recorder memory at any time by pressing the
4
(SONG RECORDER)
button to enter the
playback mode and then pressing
bs
(START/
STOP)
.
IMPORTANT!
• A new recording replaces (deletes) previously
recorded contents.
• If power to the Digital Piano is cut off while recording
is in progress, everything you recorded up to that
point will be deleted. Take care so power is not
turned off accidentally during recording operations.
You can record up to five songs (numbered 1 through
5) in memory. After that, you can select a specific song
for playback.
1.
Use the
4
(SONG RECORDER) button to
cycle through the Song Recorder modes until
the lamp above the SONG RECORDER
button is lit. This is the Song Recorder
playback mode.
2.
While holding down the
cs
(FUNCTION)
button, press the
4
(SONG RECORDER)
button.
This displays the song selection screen.
3.
Use the
ct
(w, q) buttons to select the
song number you want.
4.
Press the
dm
(EXIT) button to exit the song
selection screen.
5.
To record to the currently selected song,
press the
4
(SONG RECORDER) button. To
play back the currently selected song, press
the
bs
(START/STOP) button.
6.
If you are recording, continue from step 2
under “Recording to Built-in Song Memory
(Song Recorder)” (page E-33).
Unlit: Song Recorder off
Recording or Playing Back
Multiple Songs
Lit: Playback mode