Casio AP-80R - Manual (Page 36)

E-34
429A-E-036A
Using a Memory Card
Display Message
Err Card R/W
Err CardFull
Err No Card
Err FileName
Err ReadOnly
Err Format
Err Mem Full
Err Not SMF0
Err No File
Err Protect
Err WrongDat
Err SizeOver
Err No Data
Cause
There is something wrong with the memory card.
The memory card is full.
1. The memory card is not set correctly in the card slot.
2. There is no memory card in the card slot or the card
was removed part way through a card access
operation.
1. A file with the same name as the one you are trying
to use already exists on the memory card.
2. You are trying to use a file name that is not allowed
by MS-DOS.
You are trying to use a file name that is already used
for a read-only file on the memory card.
1. The format of the memory card in the card slot is
not supported by this digital piano.
2. The memory card in the card slot is not formatted.
3. There is something wrong with the memory card.
There is not enough digital piano memory available
to hold the data you are trying to load.
You are attempting to load SMF (Standard MIDI File)
data that is not Format 0.
You are trying to load data from a card that does not
contain any data that is supported by this digital piano.
You are trying to save data to a memory card that is
write-protected.
There is a problem with the data on the memory card
or the data is corrupted.
The data file size is greater than 132 kilobytes.
You are attempting to save a user song that does not
contain any data.
Action
Use a different card.
1. Use a different card.
2. Delete files you no longer need from the card (page
E- 32).
1. Remove the card and reinsert it correctly (page
E-30).
2. Insert a card into the card slot. Never remove a card
from the card slot while a card access operation is
in progress.
1. Use a different file name (page E-32).
2. Name files using the allowable characters (page
E-33).
Use a different card or use a different name.
1. Use a card that has the supported format (page
E-29).
2. Format the card (page E-33).
3. Use a different card.
1. Delete data you no longer need from the load
destination where you are trying to store it.
2. If you are loading data to Song Memory, delete song
data you no longer need (page E-25).
Use only Format 0 SMF data.
Change to a memory card that contains data saved by
or supported by this digital piano.
1. Use a different card.
2. If you want to write to the current memory card,
remove it from the card slot and remove the write
protect sticker (page E-29).
Use different data or a different card.
Select a data that is 132 kilobytes in size or smaller.
Select a user song that contains data.
Memory Card Error Messages
AP80R_e_29-41.p65 04.8.26, 3:44 PM 34