Vcr and satellite receiver connection – Epson LS57P1 User Manual
Page 26
26
Setting Up the TV
VCR and Satellite Receiver Connection
1
Turn off and unplug your TV, VCR, and satellite receiver.
2
Connect the VCR as described in “VCR Connection” on page 23.
3
Connect the satellite antenna cable to the Satellite In connector on your satellite
receiver.
4
Connect one end of an S-Video cable to one of the S-Video connector on your satellite
receiver.
5
Connect the other end of the S-Video cable to one of the S-Video connectors on your
VCR.
6
Connect one end of a standard, red/white audio cable to the R and L Audio Line Out
connectors on your satellite receiver.
7
Connect the other end of the audio cable to the R and L Audio Line In connectors on
your VCR.
Note
Before connecting a
satellite receiver to the TV,
be sure to read any
instructions that came with
the receiver.
Note
If your satellite receiver
doesn’t have an S-Video
connector, you can
connect a video cable
(yellow) to the Video
connectors instead of the
S-Video cable using these
instructions.
It’s best to connect your
satellite receiver to the
S-Video connectors on the
back of the TV to free up
the S-Video connector on
the front to connect a
camcorder.