Epson 11880 - Manual (Page 11)

Control Panel Menus (continued) Control Panel Menus (continued)
10
HEAD ALIGNMENT PAPER THICKNESS
SELECT PAPER TYPE
SELECT THICKNESS 8 mil (0.2mm), 4 mil to 60 mil (0.1 to 1.5 mm)
ALIGNMENT
AUTO UNI-D, BI-D 2-COLOR, BI-D ALL, BI-D #1, BI-D #2, BI-D #3, BI-D #4
MANUAL UNI-D, BI-D 2-COLOR, BI-D ALL
NETWORK SETUP NETWORK SETUP DISABLE, ENABLE
IP ADDRESS SETTING AUTO, PANEL
IP, SM, DG SETTING IP address, subnet mask, default gateway
BONJOUR ON, OFF
INIT NETWORK SETTING Resets all network settings
PAPER SETUP PAPER TYPE Media type loaded in the printer
ROLL PAPER REMAINING Setting appears only when no paper is loaded
REMAINING PPR SETUP OFF, ON:PRINT EVERY PAGE, ON:AT ROLL EXCHANGE
ROLL PAPER LENGTH From 15 to 300 ft
ROLL LENGTH ALERT From 3 to 50 ft
CUSTOM PAPER Paper No 1 to 10
PAPER TYPE Photo, Proofing, Fine Art, Matte, Plain, Others
PLATEN GAP STANDARD, NARROW, WIDE, WIDER, WIDEST
THICKNESS PATTERN PRINT
CUT METHOD STANDARD, THIN PAPER, THICK PAPER FAST,
THICK PAPER SLOW
PAPER FEED ADJUST -0.70% to 0.70%
DRYING TIME 0.0 sec. to 10.0 sec.
PAPER SUCTION STANDARD, -1, -2, -3, -4