Emerson Radio RP6249 - Manual (Page 6)

5
• Remove the coiled AC cord from the storage compartment and extend it to its
full length.
• Position the cover over the battery compartment and place the cord into the
notch on the battery compartment cover as shown.
• Slide the battery cover upward until it snaps back into place.
Connect the AC cord to your 120V 60Hz outlet.
Note: When the AC power cord is connected to the outlet the power source
automatically switches to AC. You may leave batteries inside the unit if desired.
There is no battery consumption when the power cord is connected to an AC
outlet.
CAUTION
This radio is designed to operate on normal 120V 60Hz AC power only. Do not
attempt to operate the radio on any other power source. You could cause damage
to the radio that is not covered by your warranty.
This radio uses a polarized AC plug which
has one blade wider than the other. This plug
will only fit into a polarized AC outlet. This is
a safety feature. If the plug will not fit, you
may have an older non-polarized AC outlet.
Do not defeat the safety feature by trying to
file the wider blade, or replacing the plug.
Contact an electrician to replace your
outdated outlet.
O P E N O P E N
AC Plug
AC Outlet
RP6248-49_062705.p65 27/6/2005, 11:56 5