Auriol Z29962E_F - Manual (Page 17)

17 GB
If synchronisation with the atomic clock is not possible
during setup, change the position of the weather
station (e.g. to next to a window).
j If the weather station does not work properly, you
can restart it by pressing the ADJUST button 12 .
Reception may be seriously restricted by certain
obstacles (e.g. concrete walls) or sources of inter-
ference (e.g. other electrical devices).
If interference with reception of the radio signal con-
tinues, you can also set the time and date manually
(see “Setting the time / date manually”).
Q
Operation
Reception of the DCF radio signal may be disrupted
or interrupted at the location of the weather station.
In this case you are able to set the instrument
manually.
Q
Setting the time / date manually
1. Press and hold the CLOCK button 14 for approx.
3 seconds. The hours on the time display 10
begin to flash.
2. Press the ADJUST button 12 to set the required
number.