Timing / storing and retrieving lap times – Auriol Z29592 User Manual
Page 19
19
GB
Before using it for the first time, the stopwatch will read 0.
˽
Press the MODE button
2
as often as necessary until
CHR appears in the display
5
.
˽
Press the ST. / STP. button
4
to start the stopwatch.
Press the button again to stop the stopwatch.
˽
The display
5
will indicate the time between start
and stop.
˽
If you press the ST. / STP. button
4
again, the time will
continue to run again.
˽
Press the RESET button
1
for 2 seconds to reset the
stopwatch display to 0 again.
Note: With time measurements longer than one hour,
the hours, minutes and seconds are indicated in the time
display.
©
Timing / storing and
retrieving lap times
Timing and storing lap times
You can time and store up to 10 lap times.
˽
Press the MODE button
2
as often as necessary until
CHR appears in the display
5
.
˽
Press the ST. / STP. button
4
to start the stopwatch.