Auriol H4286A_B - Manual (Page 18)

16 GB
adhesion. After installation, do not change the
position of the self-adhesive pad
15 , otherwise
the level of adhesion achieved by the self-
adhesive pad could be reduced.
© Temperature memory
˽
Press the MIN / MAX button 7 to show
the lowest temperature measured indoors,
“IN”
3 , and outdoors, “OUT” 4 .
˽
Press the MIN / MAX button 7 again to
display the highest measured temperature.
˽
Press the MIN / MAX button 7 again to
return to the current temperature.
Note: if the MIN / MAX button 7 is
not pressed for 5 seconds, the display
automatically reverts to the current
temperature.
Note: the stored minimum and maximum
temperature is deleted every day at
00:00 hours and measurement begins
again.
28.02.11 16:09