Aquapur Z31511 Lint Remover - Manual (Page 35)

35 GB/MT
Note: We recommend that you do not operate
the device for more than about 2 minutes in one
session.
Select between different height settings by turn-
ing the glide piece 7 towards the left or right.
You may select the settings H (high), M (middle)
and L (low).
Cleaning
Never put the device in water for
cleaning.
Always switch off the device before cleaning it,
then open the battery compartment 8 cover.
Remove the batteries 3 from the battery com-
partment to prevent accidentally switching the
device on.
Then pull the protective cover 6 off of the de-
vice.
ATTENTION: When removing lint remains, be
careful not to damage the cutting blade
1 .
The lint container 4 should be emptied regularly!
1. Lint container: Pull off the lint container and
empty it (figures E and F). The
lint container should never be
more than 3 / 4 full.
2. Cutting blade: Carefully remove the blade at-
tachment. Wipe away or brush
out any lint remains with the in-
cluded cleaning brush.
90234_Fusselentferner_content_IT.indd 35 14.06.13 13:03