Curtis SCR4975 - Manual (Page 9)

TO SKIP/SEARCH
1) Press the ON/OFF Button (#3) to turn on the unit, insert a CD and press the PLAY/PAUSE
(#1) Button to begin playback.
2) Press FWD/HR button (#11) or REV/MIN button (#10) to select a desired track. Press and
hold the FWD/HR button (#11) or REV/MIN button (#10) to quickly search for a musical
passage.
NOTES:
 If a disc is inserted incorrectly, dirty or damaged, it will not play.
 To prevent damage to the disc, never open the CD door while the disc is rotating. Wait for the
disc to stop before opening the CD door. Never touch the lens when the CD door is open.
 The CD player should only be used on a steady surface.
RANDOM PLAYBACK
To randomly playback the tracks on a CD, press the SLEEP/RANDOM button (#15) for 2seconds,
the RDM indicator light. Press FWD/HR button (#11) or REV/MIN button (#10) to select random
track. TO CANCEL, press SLEEP/RANDOM button (#15) again for 2 seconds. The RDM
indicator disappear.
TO REPEATEDLY PLAY BACK ONE TRACK/ALL TRACKS
1) To repeat a single track, press the REP/PROG button (#6) once; the REP indicator will light.
Press the PLAY/PAUSE button (#1) to begin playback. Press the FWD/HR button (#11) or
REV/MIN button(#10) to select the specific track that you wish to repeat.The specific track
you selected will be repeated continuously.
2) To repeat all of the tracks on a disc continuously, press the REP/PROG button(#6) twice,the
REP indicator will blink.Press the PLAY/PAUSE button(#1) to begin playback.All tracks will
be repeated continuously.
TO CANCEL,press the REP/PROG(#6) again,the REP indicator will turn off.
CD PROGRAMMED PLAY
1. Under CD stop condition,long press the REP/PROG button(#6) to enter programmed station.
2. Press FWD/HR button(#11) or REV/MIN button(#10) to select the song to be programmed.
3. Press the REP/PROG Button (#6) again to store selection. The Display (#4) will advance to
“02”.
4. Press the FWD/HR button(#11) or REV/MIN button(#10) to select the next song to be
programmed and press the REP/PROG Button (#6) to store selection.
5. You may repeat steps #2 - #3
to program as many as 20 tracks. If you attempt to program
more than 20 tracks, the Display(#4) will revert to “01” and the old entry will be
overwritten by the current new entry!
6. Press STOP Button (#2) to end programming and return to normal play mode.
7. To check the programmed tracks, press REP/PROG Button (#6) continuous to show all the
programmed songs. The Display (#4) will display the program number first and then
followed by the flashing track number.
8. Press PLAY/PAUSE Button (#1) to begin programmed play. The first track in program will
appear in the Display (#4) and the PROG Indicator will light steadily.
9. To cancel programmed play, press the STOP Button (#2).