Curtis SCR4975 - Manual (Page 10)

CLOCK/ALARM SETTING
TO SET OR RESET THE ACTUAL TIME
When unit turn off:
1) Press the TIME-SET(#5) to select 12hours style and 24hous style.
2) Long press the TIME-SET(#5) to adjust the time.The time on display will flash.
3) Press the REV/MIN(#10) and FWD/HR(#11) to set the minuteds and hours.Long press the
REV/MIN or RWD/HR to quicly select the time.
4) After adjusting the time,press the TIME-SET to keep the time.
When unit on:
1) Press TIME-SET(#5) to show the time,press TIME-SET(#5) again to select 12hours or
24hours style.
2) Long press the TIME-SET(#5) to adjust the time.The time on display will light.
3) Press the REV/MIN(#10) and FWD/HR(#11) to set the minuteds and hours.Long press the
REV/MIN or RWD/HR to quicly select the time.
4) After adjusting the time,press the TIME-SET to keep the time.
TO SET OR RESET THE ALARM TIME
1) Press the ALM1-SET(#13) or ALM2-SET(#14) once to check the time ,press twice to check
the ALARM style(CD/RADIO/BUZZ),press third time to open or close the ALARM.
2) Long press ALM1-SET(#13) or ALM2-SET(#14) to set the alarm and also the ALARM be
opened automatically.At this time,ALARM1 or ALARM 2 indicator will flash.
3) Press REV/MIN(#10) and FWD/HR(#11) to set the hour and minutes. Long press the
REV/MIN or RWD/HR to quicly select the time.
4) After seting,press ALM1-SET(#13) or ALM2-SET(#14) to keep the alarm time.Then press the
REV/MIN(#10) and FWD/HR(#11) to chose the alarm style((CD/RADIO/BUZZ),at last press
ALM1-SET(#13) or ALM2-SET(#14) to keep it.
Remark:if chose alarm style as CD or RADIO,when alarm ringing,then 59 minutes later,unit will
turn off automatically.If BUZZ style,1 minute later,it will turn off.
5) When ringing,ALARM 1 or ALARM 2 indicator will flash accordingly.
6) Press any buttom to turn off the ALARM function except the SNOOZE button.
SNOOZE FUNCTION
When ringing,press SNOOZE button (#16) to turn off the alarm and the unit enter SNOOZE
station,the SNOOZE indicator will light and the indicator of ALARM 1 or ALARM 2 will
flash.The alarm will turn back on automatically 5 minutes later,the indicator of SNOOZE will turn
off.The unit can be repeated endlessly.
SLEEP FUNCTION
TO ACTIVATE THE SLEEP FUNCTION
1.When the unit turn off,press SLEEP /RDM button(#15) to set in “90minutes” and the unit will
turn on automatically.At this time,the SLEEP indicator will light.Press twice to set
“60minutes”,press third times to set “30minutes”,press four times to set “15 minutes”,press five
times to turn off the unit automatically.
Remark:if press ON/OFF button(#3) to turn on the unit,it will show “off” when press at fifth time
and cancel the SLEEP seting automatically after a moment.