Curtis SCR4975 - Manual (Page 8)

18. DIMMER
19. FM/AM Selector
20. Tuning Button
21. Battery compartment(For clock back up)
22. FM Antenna wire(rear of unit)
23. AC~IN
POWER SOURCE
This unit operates from AC120V/60Hz line power supply.
AC OPERATION
Connect AC Power Cord to a wall outlet with AC120V/60Hz power supply.
RADIO OPERATION
TO PLAY THE RADIO
Connect AC Power Cord to a wall outlet with AC120V/60Hz power supply.
1) Press the ON/OFF (#3) to turn the unit on. The unit will default into “Radio” station.
2) Slide the FM/AM Switch (# 19) to the desired band (AM or FM).
3) Tune a station by turning the TUNING control (#20).
Please note the unit default into FM STEREO.
4) Adjust the VOLUEM control as desired.
Antennas
FM: Extend the FM antenna wire (#22) for better FM reception.
AM: Turn the unit for better AM reception.
CD OPERATION
TO PLAY A CD
1) Press the ON/OFF (#3) to turn the unit on. The unit will default into “Radio” station.
2) Press the FUNCTION Button (#8) to change into “CD” position.
3) Open the CD compartment door (#7) by pressing the OPEN/CLOSE area (#9).Insert a disc
and close the CD compartment door.
4) To play a disc from the beginning, press the PLAY/PAUSE Button (#1).The track which is
playing is light. Press the PLAY/PAUSE Button (#1) again to pause playback; Press the
PLAY/PAUSE Button (#1) once again to continue playback.
5) Adjust the VOLUME control(#17)as desired
6) Press the STOP Button (#2) to stop the disc before it is finished.
7) Press the ON/OFF Button (#3) to turn off the unit.