Curtis IP1006UK - Manual (Page 14)

TROUBLESHOOTING GUIDE
SPECIFICATION
PROBLEM SOLUTION POSSIBLE CAUSE
iPod ® does not
dock properly
Using no or wrong iPod ® insert. Make sure the dock insert is the
proper fit for your iPod
® .
iPod ® didnít install properly. Remove your iPod ® from the dock
and check for obstruction on the
connectors in the dock and on your
iPod
® . Then reseat it in the dock.
iPod ® does not
respond to the
unit
iPod ® is not installed properly. Remove your iPod ® from the dock
and check for obstruction on the
connectors in the dock and on your
iPod
® . Then reseat it in the dock.
iPod ® is locked up. Please make sure your iPod ® is
working properly before docking into
the unit. Please refer to your iPod
®
manual for details.
iPod ® didnít
charge up
iPod ® is not installed properly. Remove your iPod ® from the dock
and check for obstruction on the
connectors in the dock and on your
iPod
® . Then reseat it in the dock.
Power Requirement:
Frequency Range:
Power Consumption:
AC
230V 50Hz
DC 12V (1.5V x 8 “C” SIZE, UM - 2 BATTERIES)
FM 87.5 - 108 mHz
AM 530 - 1710 kHz
23 W
14