Curtis IP1006UK - Manual (Page 13)

TROUBLESHOOTING GUIDE
PROBLEM SOLUTION POSSIBLE CAUSE
GENERAL
No sound is heard. Power is not on.
VOLUME Control is set
to minimum.
Press the POWER button.
Adjust the VOLUME
Control.
RADIO
Station has not been
tuned properly.
FM reception is weak.
Wrong function is
selected.
Slide the FUNCTION
knob to the
radio position.
No sound is heard.
Tune station properly.
Extend the FM antenna.
CD
All or part of the CD
will not play.
CD is inserted
incorrectly.
Make sure that the CD is
placed in the tray with the
label side up.
CD is scratched. Try another CD.
CD is dirty
Clean the CD with
soft cloth
CD is warped Try another CD.
Condensation has formed
inside your CD player.
Remove the CD and leave
the CD tray open for about
one hour to let the CD player
dry out.
Function swtich is not
set to CD.
Set Function switch to CD
CD compartment not
closed
Close CD compartment
door.
13