Curtis RCD3830 - Manual (Page 19)

18
TIMER Function (Remote Control Only)
This system includes a programmable Timer function that will turn the system
'On'. You can use the timer to wake you up to the radio or to your favorite CD.
The timer can be programmed while the system is in the Standby (Power Off)
mode, the Tuner mode or the CD mode.
Note: You can set the turn-on time only in the standby mode.
To Set The Turn On Time
1.) Press the TIMER button (on the remote control) once. The "AM 12:00"
appears and the TIMER indicator begins flashing in the display. Then press
the MEMORY/CLOCK button for at least 3 seconds. The Hour digits begin
to flash.
2.) Press the or button on the front panel of the main unit or the remote
control to set the display to the desired turn- on hour AM or PM.
3.) Press the MEMORY/CLOCK button on the remote control. The Minute digits
begin flashing.
4.) Press the and buttons on the front panel of the main unit or the
remote control to set the display to the desired turn-on minute.
TIMER
TIMER