Curtis RCD3830 - Manual (Page 18)

1 7
5.) Use the or buttons to select the next track to be programmed. When the
desired track number appears in the display, press the MEMORY button again
to enter that track in the program memory.
6.) Repeat Step 4 and 5 until you have entered up to 20 tracks in the program
memory.
7.) To begin programmed playback, press the PLAY/PAUSE button. The display
will show the first programmed track and playback will begin on that track. The
MEMORY indicator stops flashing and remains in the display.
After the last programmed track has played, the player stops but the programmed
tracks remain in the memory. To play the programmed tracks again, press the
MEMORY button and then the PLAY/PAUSE button.
To cancel the programmed sequence from memory, press the STOP button at
programming mode or open the CD door.
Program Repeat Playback
You can use the Program and Repeat features together to continuously repeat a
programmed sequence of the tracks. First, program the desired tracks according
to Steps 1 through 7 on the previous page. When Programmed Playback begins
press the MEM-UP/REPEAT button twice to activate the "All Tracks Repeat" feature.
The REPEAT Indicator appears in LCD display and all the tracks in your programmed
sequence will be repeated continuously.
To cancel Programmed Repeat Playback, press the STOP button until both the
MEMORY and REPEAT Indicators disappear. ‘ ’.