Curtis LT5000 User Manual

Page 15

Back to press the WIFI network name when complete saving. For
example: press “KW”
Then it will have an interface, asking for input the code, input the
right code, and then press the “finish”. Then the system will be
connected and will distribute the IP address automatically, it will
show “connected” once the system is completed connection. You
can see the network connecting status accordingly when you press
the network name. There will be a WIFI icon “ ” see the figure as
below:

3.7 USB HOST Function:
The default setting of USB Host is disabled for the first time to use
this device or after resetting. To switch on U disk to recognize USB
host function, click “ USB mode select” in setting menu, and then click
USB mode to open it.
a. Turn on The USB- HOST:

Press menu icon , enter into the function list, press “setting” to
enter into setting interface, press “USB Mode select” to select the
“HOST MODE” ad it shows in the red circle as below:

Connection information

This manual is related to the following products:

LT4399