Curtis LT5000 - Manual (Page 12)

12
new mail
3.6 WI-FI Setting
a. Turn on the WIFI setting: Tap the module icon , enter into
function menu list; press “setting” enter into the setting interface;
press “wireless and network” to setup, just select the WIFI as below:
b. Set the WIFI and connect to the network:
Press “Wifi setting” to
enter into the wifi, the system will find the WIFI name automatically.
Please refer to the picture as below, it has found two WIFI network
name:
c. IP address setting and connection: There are two setting
methods to set the IP address.
1.
Distribute IP Address automatically：
Whether it distributes the IP address automatically or not is
depended on the WIFI Router’s setting, if it distributes the IP
address automatically, just press the top right corner of the screen
“
” to enter into “advanced” setting to cancel the selection of the
“Use static IP”