Curtis DPB702A - Manual (Page 7)

10
Alarm
11
Operation instructions
After selecting [Alarm] from the main menu, press
[Play] key to enter into the alarm setting mode menu.
1.Enable
This is for setting alarm function On/Off. Select [ON],
press [Play] key for enabling the alarm; while [Off]
for disabling the alarm.
2.Set Time
This is for setting alarm time (The method is the same as setting the date.).
3.Exit
Exit from alarm setting mode, return back to the main menu.
Compatible format: JPEG/MP3/WMA, etc.
Panel size: 7 inch
Frequency Response: 20Hz to 20 Khz
USB: support USB1.1 (It identifies USB 2.0, but can read it only in way of USB1.1)
Maximum pixel for single image: 7 mega pixel (In case of over 7 mega pixel, it
reads slowly.)
Power supply: DC 9V~12V
Power Consumption: 10W
Operation temperature: 5~40
Weight: 0.52 KG
Dimensions (LxWxH): 255x195x38mm
Specifications and Troubleshooting
Specifications
Troubleshooting
PROBLEM SOLUTION
No sound or
distorted sound Make sure the file format is MP3/WMA
The feature or action cannot be completed at this time because:
1. The file's software restricts it.
2. The file's software doesn't support the feature
3. The feature is not available at the moment.
Picture is distorted
The file might be damaged. Try another file;
It is normal for some distortion to appear during forward or
reverse scan.
The icon
appears on
screen
Can not advance
through a movie You can not advance through the opening credits and
warning information that appears at the beginning of
movies because the file is programmed to prohibit that
action
Owing to continuous improvement, no prior notice will be given regarding changes on above
feature and spec.