Curtis DPB702A - Manual (Page 5)

7 6
Operation instructions
1.Insert USB or SD/MMC/MS card.
2.Select the file (e.g. photo, audio) to play from the main
interface, press OK key to start playing.
Play image file
After selecting image option from the main menu, press OK
key for automatic test of the availability of storage device
(USB, memory card).If it does not connect with the storage
device, it will skip to the main menu. After connecting the
storage device and confirming correct reading, it will enter
into the mode the user selects.
In image mode, the system supports to play image in
format of JPG/BMP only.
Upon the user opens the automatic play function of image,
it will perform automatic play after entering into the image mode.
While playing image in USB or memory card, press copy key to copy the image to Flash
memory.
While playing image in Flash memory, press delete key to delete the selected image.
While playing BMP image, the system will display the reading process.
Play audio file
After selecting audio option in the main menu, press OK
key for automatic test of the availability of storage device
(USB, memory card) . If it does not connect with the
storage device, it will skip to the main menu. After
connecting the storage device and confirming correct
reading, it will enter into the mode the user selects.
In audio mode, the system supports to play audio in
format of MP3/WMA only.
If the user opens the automatic play function of audio, it
will perform automatic play after entering into the audio mode.
Play image + audio file
After selecting image + audio option in the main menu, press OK key for automatic test
of the availability of storage device (USB, memory card). If it does not connect with the
storage device, it will skip to the main menu. After connecting the storage device and
confirming correct reading, it will enter into the mode the user selects.
In image + audio mode, the system supports to play audio in format of JPG/BMP/MP3/
WMA only.
After the user enters into image + audio mode, it will perform automatic play.
Operation instructions
Setting
“Setting”: Press / key to select “Setting” item. And then to press “OK” key to enter into
the sub-menu. Users can set “Photo Setting”, “Auto-play”, “Display Setup”, and “Custom
Setup” as per demand. Press OK key to enter into sub-menu for setting; press / key
for switchover between the two pages above. After entering into “Exit from setting menu”,
press OK key tips to exit from “Setting menu”: press / key to select the option to be set;
press / key to adjust parameters.
1. Photo Setting
1.Interval Time
This is used for setting playing time of the image:
four options available including 5 seconds, 10
seconds, 15 seconds and 30 seconds.
2.Transition Effect
This is used for setting repeat playing mode of
image: six options available including No Effect,
Random, Cover Up, Cover Down, Cover Left and Cover Right.
3.Show Type :
Fit Screen, Full Screen optional
4.Browse
This is used for setting the access mode of image function, and there are two
options: Thumbnail, file manager
2. Auto-play
1.Photo
It provides the On/Off function for image automatic
play function. In case of automatic play On, when
user uses [Image] function, it will automatically
enter into [Slide show mode]; in case of automatic
play Off, it will enter into [thumbnail mode] or [file
manager ] for user to browse the image.
2.Music
It provides the On/Off function for music automatic
play function. In case of automatic play On, after entering into [file manager],
it will automatically play music; in case of automatic play Off, the user is required to
select the file to be played manually, and press [Play] to start playing.
3.Movie
It provides the On/Off function for music automatic play function. In case of automatic
play On, after entering into [file manager], it will automatically play video
and movie; in case of automatic play Off, the user is required to select the file to be
played manually, and press [Play] to start playing.