Curtis DPB702A - Manual (Page 6)

9 9 8 8
Operation instructions
3. Display Setup
1.TFT brightness
This is used for setting the brightness of the interface
displayed among the seven level ranging -3~0~+3.
The larger number means the higher brightness.
2.TFT contrast
This is used for setting the contrast of the interface
displayed among the seven level ranging -3~0~+3.
The larger number means the higher contrast.
3.TFT Saturation
This is used for setting the saturation of the interface displayed among the seven level
ranging -3~0~+3. The larger number means the higher saturation.
4. Custom Setup
1.OSD Language
This is used for selecting language used for OSD
2.Style
This provides the style options for user, and totally
four options available.
3.Repeat Mode
This is used for setting the repeat mode, and there
are four options including Off, One, Folder, and All.
Off: Release repeat mode;
One: Repeat the file being played;
Folder: Repeat the file folder being played;
All: Repeat playing all the files saved in the media.
4.Media
This is used for selecting the multi-media device to
connect by the user.
5.Default
This is used for returning to the default values. After setting this preset value, all the
set values will be back to initial setting of the system.
5. Exit
Confirm the SETUP item, return back to the main menu.
After select it, press “ ” to enter the submenu
and press “ ” and “ ” to choose the language
you desire and press OK to confirm. Press “MENU”
to return.
Calender
Clock
Operation instructions
After selecting [Calendar] from the main menu, press
[Play] key to enter into date setting mode as shown in
the figure.
1.Display
Select this item to enter into date dialogue box
(As shown in the following figure):
If to browse the date of other time section, use
/ key to change month and / key to change
year.
2.Set Date
After selecting this item, press [OK] key to change
date. Use / key to change item, and / to
change date.
3.Exit
After completion of setting, it is for exiting from the
date setting menu.
Clock
After selecting [Clock] from the main menu, press
[OK] key to enter into time setting mode menu:
1. Display: This is to display the desired [Time] or
[Time & Calendar].
Select [Time], press [Play] key;
Select [Time & Calendar], press [Play] key;
2. Set time
This is used for setting the
system time (The method
is the same as setting the
date.)
3. Exit
Exit from time setting mode,
return to the main menu.