Emerson Radio CKD5809 - Manual (Page 25)

2 4
Programmed Playback
Programmed playback allows you to program the player to play up to 20 tracks on
a disc in any desired order. You may also program the same track to play multiple
times within the same program if desired.
Note: You cannot program the player while the disc is playing. If the disc is
playing press the STOP button first and then perform the following steps.
1.) Press the PROGRAM button. The
Program “PROG” indicator and Track
number “0” begin flashing in the display.
2.) Press the or buttons to select
the first track to be programmed.
Example: Track 7
3.) When track number 7 is flashing in the
display press the PROGRAM button
again to enter track number 7 in
program memory number 1.
The track number display returns to “0”.
4.) Press the or buttons to select the next track number to be programmed,
and when the desired track number is flashing on the display press the
PROGRAM button to enter that track in the program memory.
5.) Repeat step 4 until you have entered up to 20 tracks in the program memory.
6.) Press the PLAY/PAUSE button to begin programmed playback.
The PLAY indicator appears and the
Program “PROG” indicator continues to
flash. The tracks you programmed will
be played in the desired order.
CKD5809_030706.p65 7/3/2006, 14:57 24