Emerson Radio NR53 - Manual (Page 9)

8
OPERATING INSTRUCTIONS
LISTENING TO THE RADIO
1.) To turn the system ‘on’, rotate the ON/OFF-VOLUME control clockwise until a
‘click’ is heard, and set the Volume to a low level. The Tuning Dial light comes
‘on’.
2.) Set the FUNCTION selector (AUX/CD/TUNER) to the TUNER position.
3.) Set the BAND selector (AM/FM/FM ST.) to the desired band..
4.) Rotate the TUNING control to tune to the desired radio station. If you selected
the FM ST setting and you tune to an FM Stereo station, the FM STEREO
indicator will come ‘on’.
If FM Stereo reception is noisy or weak, set the BAND selector to the ‘FM’
position. This will normally improve the reception but the sound will no longer
be in stereo,
5.) Adjust the ON/OFF-VOLUME control to the desired level.
6.) When you are finished listening turn the ON/OFF-VOLUME control counter
clockwise until a ‘click’ is heard.
Antenna Information
The AM antenna is inside the
cabinet. If AM reception is
unsatisfactory try repositioning
the cabinet slightly until the
internal antenna is picking up the
strongest signal.
The FM wire antenna is located on the back cabinet. If necessary adjust the position
and direction of this antenna until you find the position that provides the best
reception.
NR53_010704.p65 7/1/2004, 17:24 8