Parkside PHP 500 C2 - Manual (Page 23)

20 PHP 500 C2
GB
MT
HOT GLUE GUN
PHP 500 C2
Introduction
We congratulate you on the purchase of
your new device. You have chosen a high
quality product. The instructions for use
are part of the product. They contain important
information concerning safety, use and disposal.
Before using the product, please familiarise
yourself with all of the safety information and
instructions for use. Only use the unit as described
and for the specifi ed applications. If you pass the
product on to anyone else, please ensure that you
also pass on all the documentation with it.
Proper use
The device is intended for gluing wood, cardboard,
packaging, PVC, carpet, seals, plastic, leather,
ceramic, glass and textiles with hot-melt adhesive.
The material to be glued must be clean, dry and
free of grease. Any other use or modifi cation to the
tool shall be considered as improper use and could
give rise to considerable dangers. The manufacturer
will not accept liability for loss or damage arising
from improper use. The tool is not intended for com-
mercial use.
Features
Feed channel
Check indicator
Charger connection
Charger with stand
Feed clamp
Plastic stand
Drip tray
Nozzle
Nozzle heat shield
Glue gun connection
Mains lead
Included items
1 Hot glue gun PHP 500 C2
1 Charger with stand
1 Mains lead
1 Plastic stand
1 Interchangeable nozzle (short / fl at)
1 Interchangeable nozzle (short / round, pre-
assembled)
1 Interchangeable nozzle (long)
6 Glue sticks
1 Carry case
1 Operating instructions
Technical details
Nominal voltage: 230V ∼ 50 Hz
Nominal power: 25 W (starting 500 W)
Heating up time: approx. 5 min.
Protection class: II /
Safety notes
WARNING!
► Please read all the instructions and advice.
Failure to observe the instructions and advice
given below may result in electric shock, fi re
and / or serious injury.
Keep all the safety advice and instructions in
a safe place for future reference!
1. Workplace safety
a) Keep your working area clean and clutter-
free. Untidy or poorly lit working areas can
lead to accidents.
b) Do not allow the device to become wet.
Do not operate it in a moist environment.
c) Keep children and other people away
while you are operating the electrical tool.
Distractions can cause you to lose control of the
device.
IB_60269_PHP500C2_LB5.indb 20 23.06.14 16:49