Changing the on-screen display, Parental control – Emerson EWD2203 User Manual
Page 28
– 28 –
EN
1L25
CHANGING THE ON-SCREEN
DISPLAY
You can check the information about the current disc
by pressing DISPLAY on the remote control.
For DVD-Vs
1
Press DISPLAY during playback to show
current Chapter.
¡
The elapsed and remaining
playing time of the current
chapter will be displayed.
2
Press DISPLAY again to show current Title.
¡
The elapsed and remaining playing time of the cur-
rent title will be displayed.
3
Press DISPLAY third time.
¡
The BIT RATE and the current repeat setting will be
displayed.
¡
If you are playing a dual layered disc, the layer num-
ber will also be displayed (L0: Layer 0 is playing.
L1: Layer 1 is playing).
4
Press DISPLAY the fourth time to remove
the display.
For audio CDs
1
Press DISPLAY during playback, the current
Track will be displayed on the TV screen.
¡
The elapsed and remaining playing time of the cur-
rent track will be displayed.
2
Press DISPLAY again to show current Total
Track.
¡
The elapsed and remaining playing time of the cur-
rent total track will be displayed.
3
Press DISPLAY third time to remove the dis-
play.
CD
DVD-V
9/49 0:00:00 -0:00:00
PARENTAL CONTROL
Parental Control limits the disc viewing that exceed
your settings. (with a password or playback will stop.)
This feature allows you to prevent discs with alterna-
tive scenes from being played by your children.
DVD-V
PARENTAL LEVEL
Parental Level allows you to set the rating level of
your DVD discs. Playback will stop if the disc’s rat-
ings exceed the level you set.
1
Press SETUP in STOP mode.
2
Press
B
to select CUSTOM, then press
ENTER.
3
Press Arrow (
s
/B
) to select PARENTAL,
then press ENTER.
4
Enter your four-digit password then press
ENTER.
5
Press Arrow (
K
/
L
) to select PARENTAL
LEVEL, then press ENTER.
6
Press Arrow (
K
/
L
) to select the desired
level.
7
Press SETUP to exit
Notes
¡
When doing this for the first time, enter any 4 digits.
(except for 4737) That number will be used as the
password from the second time onward.
¡
To change the password, press Arrow (K/L) to
select CHANGE at step 5, then press ENTER. Enter
the four-digit pass-word, then press ENTER.
¡
With some DVDs, it may be difficult to find if they
are compatible with parental lock. Be sure to check
if the parental lock function operates in the way that
you have set.
¡
Record the password in case you forget it.
PARENTAL
PARENTAL LEVEL
ALL
IF YOU FORGET THE PASSWORD
1
Press 4, 7, 3, 7 at step 4. Then enter your
new password.
¡
Password will be cleared and parental level will be
set to ALL.
2
Proceed the above Steps 5-7 again.
H9410UD(EN).qx33 03.1.17 6:21 PM Page 28