Emerson EWD2203 - Manual (Page 15)

– 15 – EN
1L25
CONNECTING TO A DOLBY DIGITAL DECODER
If using this DVD/VCR COMBINATION UNITS to play a DVD disc in 5.1 channel Dolby Digital surround, the
DVD/VCR COMBINATION UNITS outputs a Dolby Digital data stream from its COAXIAL DIGITAL AUDIO
OUT jack. By hooking the DVD/VCR COMBINATION UNITS up to a Dolby Digital decorder, you can enjoy
a more convincing, realistic ambience with powerful and high-quality surround sound of a professional standard
such as can be heard in movie theaters.
Use an audio coaxial digital cable (commercially available) for the audio connections.
ANT-IN
ANT-OUT VIDEO OUT
AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT
COAXIAL
Y
Cb
Cr
L
R
COMPONENT VIDEO OUT
AUDIO IN
VIDEO IN
DVD/VCR VCR DVD
R
L
To COAXIAL DIGITAL
AUDIO OUT jack
To COAXIAL DIGITAL
AUDIO INPUT jack
Front speaker
(left)
Center speaker
Front speaker
(right)
Surround
speaker
(left)
Surround
speaker
(right)
Subwoofer
Dolby Digital
decoder
[Fig. 5]
Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
¡ If the output is Dolby Digital audio, connect to a Dolby Digital decorder, and set DOLBY DIGITAL to ON
for audio output in the setup mode.
¡ Unless connected to a Dolby Digital decoder, set DOLBY DIGITAL to OFF for audio output in the setup mode.
Playing a DVD using incorrect settings may generate noise distortion, and may also damage the speakers.
Notes
¡ Be sure to turn off the power to all components in the system before connecting another component.
¡ Refer to the Owner's Manuals for stereo systems and any other components to be connected to the DVD/VCR
COMBINATION UNITS.
ANT-IN
ANT-OUT VIDEO OUT
AUDIO OUT S-VIDEO OUT AUDIO OUT DIGITAL AUDIO OUT
COAXIAL
Y
Cb
Cr
L
R
COMPONENT VIDEO OUT
AUDIO IN
VIDEO IN
DVD/VCR VCR DVD
R
L
To Right (red) and Left (white)
AUDIO OUT jacks
Stereo system
To ANALOG AUDIO INPUT jacks
L
R
CONNECTING TO AN ANALOG AUDIO
[Fig. 6]
H9410UD(EN).qx33 03.1.17 6:21 PM Page 15