beautypg.com

Cleaning/maintenance, Storage, Disposal/environmental protection – Parkside PNTS 1400 B1 User Manual

Page 9

background image

9

GB

Blow Function

Operation without the use of a filter

is recommended.

• Connect the suction hose (21) to the

connecting blower (17) on the motor

head (3).

Cleaning/Maintenance

Pull out the mains plug.

Danger of electric shock.

Always check the appliance before

use for any obvious faults such as

a defective mains cable, and have

these repaired or replaced.

Cleaning.the.Equipment:

Never.hose.the.appliance.

down.with.water..Never.use.

aggressive.cleaning.agents.or.

solvents..This.could.damage.

the.appliance..

• After use, empty the stainless steel con-

tainer (

9):

- Opening the drain plug to allow the

vacuumed liquid to drain out (

10). A liquid residue remains in the

container.

To remove all residual liquids, fold

down the bow handle (1) and

take off the motor head (

3): fix

the bow handle with the locking

levers (16), hold the stainless steel

container (9) with one hand on the

bow handle and the other on the

bottom of the container and pour

out the residual liquid.

• Clean the waste tank with a damp

cloth.

• Wash the foam filter (

23) with luke-

) with luke-

warm water and soap, and allow to

dry.

• Beat the dust out of the fluted filter

(

25) and clean it with a paint brush

or hand brush.

• Replace the paper filter bag (

26)

when full (see “replacement parts” for

reordering)

Storage

1. Release both locking levers

(

16)

and fold down

the bow handle (1).

2. Wind the power cable (5)

around the power cable holder

(4).

3. The attachment ports (15/18)

serve to store the telescopic

suction hose (19), suction hose

(21) and nozzles (27/28).

4. Store the appliance in a dry

place and out of reach of chil-

dren.

Disposal/Environmental

protection

Be environmentally friendly. Return the

tool, accessories and packaging to a recy-

cling centre when you have finished with

them.

Machines must not be disposed of

with household refuse.

Take the machine to a recycling point. The

waste plastic and metal parts can be sepa-

rated, accurately graded and passed on

for recycling. Contact our Service Centre

for more details.

Defective units returned to us will be dis-

posed of for free.