Gb ie – Parkside PHD 100 A1 User Manual
Page 10
10
GB IE
Operation
• Connect the equipment to the water
tap. Observe the regulations for the
use of a system separator.
• Turn on the water tap entirely.
Never operate the pressure wash-
er with a closed water tap. Dry run-
ning will damage the washer!
Be prepared for the recoil force
of the emitted water jet! Ensure
that you are standing firmly and
that you are holding the gun (
A
5) securely, otherwise you could
injure yourself or other people.
• Switch on the pressure washer with
the ON / OFF switch (
A
5).
• Pull the lever of the gun (
A
10) to
turn on the washer.
• Hold the switch-on lever of the gun
(
A
10) until there is no more air in the
pressure washer.
Releasing the lever will switch
off the washer, but the pressure
within the system is retained.
D
• Lock / unlock the switch-on le-
ver of the gun (10) by depress-
ing the locking button (17).
Lock the switch-on lever to prevent the
pressure washer from being inadvert-
ently / accidentally started.
Locked
Open
Interrupting operation
• Release the lever of the gun (
A
10).
• During prolonged work intervals turn
off the washer by its ON / OFF switch
(
A
5).
Ending operation
• After working with cleaning agents,
run the equipment with clean water to
completely rinse the cleaning agent
from the pipes.
• Release the lever of the gun (
A
10).
• Turn off the pressure by its ON / OFF
switch (
A
5).
• Turn off the water tap.
• Disconnect the pressure washer from
the water mains.
• Pull the lever of the gun (
A
10) to
vent the pressure existing within the
system.
• Disconnect the mains plug.
Using detergents
The washer was designed for operation
with a neutral detergent based on a bio-
logically decomposable anionic tenside.
Other detergents or chemical substances
could impair the safety of the washer and
damage it.
E
Fixing the Wheels
The back wheels on the chassis (9) can
be fixed in order to secure the pressure
washer against undesired rolling away.
• To do this push the two bolts (16) out-
wards and downwards.
The wheels are now no longer able to
turn.