Parkside PAS 500 B1 - Manual (Page 37)

37
GB MT
Trouble shooting
Problem Possible cause Fault correction
Device does not start
Mains voltage is not present
Check plug socket, cable,
line, plug and fuse, where
appropriate, repair through
electrical specialist
The equipment is not
switched on
Switch on the equipment (see
“switching on/off“)
Safety stop due to missing
or incorrectly inserted
pleated filter ( 13)
Insert the pleated filter correctly
(see “cleaning/maintenance“)
Defective on/off switch
( 6)
Repair through customer
service
Defective motor
Low or lack of suction
Suction hose ( 11) or
suction tube ( 12) blocked
Remove obstructions and
blockages
The metal container ( 10)
is not closed
Close the metal container
The metal container ( 10)
is full
Empty the metal container (see
“cleaning/maintenance“)
The pleated filter ( 13) is
clogged
Clean or replace the
pleated filter (see “cleaning/
maintenance“)
The air filter ( 17) is
clogged
Clean the air filter (see
“cleaning/maintenance“)
Replacement parts
You can order replacement parts directly via our Service Centre (see addresses
page 49). Please state the appliance type when placing an order.
Item Description ........................................................................... Product No.
13 Pleated filter .............................................................................. 91099216
14 Wire filter basket........................................................................ 91099217
12 Suction tube .............................................................................. 91099242
11 Metal suction hose .................................................................... 91099243