Electrolux B1180-4 - Manual (Page 34)

34
Oven Roof
The upper heating element can be folded down to make it easier to
clean the oven roof.
Folding down the heating ele-
ment
1
Warning: Only fold down the
heating element when the oven is
switched off and there is no risk
of being burnt!
1. Remove the side shelf support rails.
2. Grip the heating element at the
front and pull it forwards and out
over the support lug on the inner
wall of the oven.
3. The heating element will now fold
down.
1
Caution: Do not use force to press
the heating element down! The
heating element might break.
Clean the oven roof
Repositioning the heating ele-
ment
1. Move the heating element back up
towards the oven roof.
2. Pull the heating element forwards
against the spring pressure and
guide it over the oven support lug.
3. Settle it onto the support.
4. Insert shelf support rail.
1
Important: The heating element
must be positioned correctly and se-
curely on both sides above the sup-
port lug on the inner wall of the
oven.