Electrolux B1180-4 - Manual (Page 15)

15
3
How to use the clock functions
• When a function has been selected, the corresponding function indi-
cator flashes for approx. 5 seconds. During this time the desired times
can be set using the
or
button.
• When the desired time has been set, the function indicator flashes for
approx. another 5 seconds. After that the function indicator is then
lit. The set time begins to run.
• Press any of the buttons to stop the acoustic signal.
• The desired oven function and temperature can be selected before or
after the clock functions Cook time and End time are set.
• When the cooking time has ended, turn the oven function and tem-
perature dial back to the OFF position.
2
Switching Off the Time Display
By switching off the time display you can save energy.
Switching off the time display
Hold down any two buttons until the display becomes dark.
Switching on the time display
Hold down any button until the time reappears in the display.
3
The display can only be switched off if none of the clock functions
Cook time
End time or Countdown are in use.