Eiki LC-SB22 - Manual (Page 29)

29
Computer Input
Adjust the horizontal area displayed by this projector. Press
the Point
7 8 buttons to decrease/increase the value.
Display area H
Adjust the vertical area displayed by this projector. Press
the Point
7 8 buttons to decrease/increase the value.
Display area V
Reset
Store
Exit the PC Adjust Menu.
Quit
To store adjusted data, move the red framed pointer to the
Store item and then press the SELECT button. Move the
red arrow pointer to any of Mode 1 to 5 in which you want
to store and then press the SELECT button.
To reset the adjusted data, select Reset and press the
SELECT button. The confirmation box will appear and then
select [Yes]. All adjustments will return to their previous
figures.
Mode free
Vacant Mode
Values of “Total dots,”
“Horizontal,” “Vertical,”
“Display area H,” and
“Display area V.”
Close this dialog box.
To store adjusted data
To clear adjusted data
To clear the stored data, move the red framed pointer to the
Mode free item and then press the SELECT button. Move
the red arrow pointer to the Mode that you want to clear
and then press the SELECT button.
✔
Note:
Display area (H/V) cannot be selected when 480i, 575i, 480p,
575p, 720p, 1035i, or 1080i is selected in the PC System Menu
(p26).
This Mode has
stored parameters .
Computer Input
Move the red framed
pointer to an item and
press the SELECT button.