Edelbrock 2104 - Manual (Page 4)

Catalog #2101, 2104, 2116, 2601, 2604, 2701, 2716,
3701, 3706, 7101, 7104, 7116, 7501, 7516, 75013 ©2008 Edelbrock Corporation
Brochure #63-0334, Rev. 6/08 - AJ/mc Page 4/4
Figure 2 - Pre-1995 Manifold Bolt Torque Sequence
Torque Bolts to 25 ft/lbs.
Firing Order: 1-8-4-3-6-5-7-2
Turn Distributor Counter-Clockwise
to Advance Ignition Timing
Edelbrock Corporation • 2700 California St. • Torrance, CA 90503
Tech Line: 800-416-8628 • E-Mail: [email protected]
Figure 1
Remove material in the shaded area on stock
throttle brackets to clear the intake manifold.
Figure 3 - Vortec/E-Tec Manifold Bolt Torque Sequence
Torque Bolts to 11 ft/lbs.
Firing Order: 1-8-4-3-6-5-7-2
Turn Distributor Counter-Clockwise
to Advance Ignition Timing
• CAMSHAFT AND HEADERS: The Performer Series manifolds are compatible with aftermarket camshafts and headers designed to work in
the idle-5500 rpm range. Edelbrock has developed dyno-matched, street proven camshafts (#2102 for 262-350 cid and #2103 for 400 cid
engines) for use with Performer Series intake manifolds. Header primary tube diameter should be 1-5/8". Performer RPM Series manifolds
are compatible with aftermarket camshafts and headers designed to work in the 1500-6500 rpm range. Edelbrock has developed dyno-
matched, street proven camshafts (#7102, 2201, or 2204 for for 262-400 c.i.d. engines) for use with Performer RPM series manifolds (see
catalog for details).
Header primary tube diameter should be 1-3/4".
®