Enfora 600/650 User Manual

Page 14

7. If you already know your Network Name, create a name for your profile. The Profile

Name should be different than the Network Name. Any is the default Network Name.
Highlight Any and enter your Network Name. The Network Name is case sensitive and
must match the Network Name (SSID) that has been configured on the Access Point/
Wi-Fi® Network you plan to connect to. If your network does not require a Network
Name you can leave Any as the Network Name.

Profile and Network Name

8. The Enfora® supported Network Mode is Infrastructure. You must connect the

Wi-Fi ® Adapter to an Access Point. Ad-hoc mode is not supported.

9. By

default

Data Encryption is disabled. To enable encryption select Data Encryption

(WEP enabled). Wired Equivalent Privacy (WEP) is a security protocol used to provide
security for a wireless network.

Infrastructure is the
supported Network
Mode

WLN1501/WLN1502 Wi-Fi Adapter

Page 11