LowFlow 8000 Series Control Valve - Manual (Page 5)

The action of the Series 8000 control valve is changed by
reversing the action of the actuator.
1. Disassemble the actuator. Refer to Section 5.
2. Reassemble the actuator with the desired action. Re-
fer to Section 5.
Ordering Spare Parts
Use only Low Flow replacement parts. Low Flow Valves
are ruggedly built, carefully assembled to accurate di-
mensions, and individually tested for performance. A
complete stock of finished parts is maintained ready for
immediate shipment. Low Flow valves are held to the
close tolerances required for precision valves. The use of
any other parts will affect valve performance.
If desired, Low Flow Valve will promptly repair your regu-
lator at a reasonable cost. To return a valve for inspection
and/or repair, please contact our customer service de-
partment for a Return Authorization Number. Phone toll-
free at 1-800-543-7311. If preferred, you may fax us at
513-871-0105.
When ordering spare parts, first make a note of the follow-
ing information on the valve's nameplate:
• serial number
• model number and size
• body material and end connections
• range
• seat and seal materials
Direct Acting (ATC)
Soft Seat Option
35M Actuator
Body shown 90°
out of position
0.501
-5-
17A 17B
16A 17C
20
46
37
47
22
26
32
45
13 20 19 40 41 18 12
42
43
44
14
33
11
8 36
9
6
7
5
2