Quick reference sheet – Linkskey LKV-9304 User Manual

Page 2

Quick Installation Guide Applicable models: LKV-9304 / LKV-9308 / LKV-9316 4/8/16-port Cascadable Rackmount USB PS/2 KVM Switch w/ OSD

Press and hold down last button (Button 2
/ Butotn4) till two beeps, release the
button and then press (y) key

Setup Menu

Auto logout: specify time for auto logout (00~99 min).
OSD timeout: specify duration for OSD menu to stay on
screen.
Autoscan period: specify time for autoscan period.
Title bar: enalble/disable the title bar, and also specify its
position. There are five title bar options:
Disable - Disable the title bar
Left – Title bar on left
Right – Title bar on right
Left ⊗ (Left Timeout) – Title bar on left for 5 seconds
Right ⊗ (Right Timeout) – Title bar on right for 5 seconds
Hotkey: specify the hotkey preceding sequence (SCROLL
LOCK, CAPS, F12 or NUM LOCK)
Password: specify the password for access.
Load Default: Load default setting to all KVM switches in the
daisy-chain.
OSD Appearance: Specify whether you want to keep or hide
the OSD menu after port switching operation.
Autoscan Mode: Select Autoscan modes. There are 4 modes
for autoscan: ALL, Live, EzV (EasyView), EzV + Live.
ALL – Scan all computer ports
Live – Scan all computers with live power feed
EzV – Scan all computers joined into the EzV Group
EasyView + Live – Scan only those Live computers within the
EzV group.
F2 Autoscan: Start Autoscan according to the autoscan mode
you have specified.

Status Menu

Status Menu

On this page, the KVM system information of each daisy-
chained unit will be shown.
For example:
01 081216 Prima-08 08
Mean it’s the first (01) bank of the KVM daisy-chain (can be up
to a maximum of 16 levels), and its firmware version date code
is 081216. Model name listed here is Prima-08, and the port
number is eight (08) ports.

FCC / CE Statements

FCC Statement: This equipment has been tested and found to comply with the
regulations for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this User Guide, may cause harmful
interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case, the user will be
required to correct the interference at his/her own expense.
CE Statement: This is a Class B product in a domestic environment, this product
may cause radio interference, in which case the user may be required to take
adequate measures.

Quick Reference Sheet

QUICK REFERNCE SHEET for Cascadable Rackmount USB PS/2 KVM Switch -- Operation Commands Hotkeys/ OSD Menu / Front-Panel Buttons

Hotkey sequence = [ScrLk]

+ [ScrLk]

+ Command key(s) * User-definable Preceding sequence = SCROLL LOCK, CAPS, F12 or NUM LOCK

Command

Hotkeys

OSD control

Front-panel

Description

Select Computer

Standalone mode:
ScrLk + ScrLk + (y) + (z)
(yz = channel no.)

Daisy-chained mode:
ScrLk + ScrLk + (a) + (b) + (y) + (z)
(ab = bank no. ; yz = channel no.)

Cursor keys to navigate
Enter to select

Press corresponding button yz
on Switch ab for channel yz on
bank ab.

Select the active bank (switch) and channel

Next lower channel

ScrLk + ScrLk +

↑

(arrow up)

Cursor keys to navigate
Enter to select

Press corresponding button

Select the next lower connected channel
within the current active bank

Next higher channel

ScrLk + ScrLk +

↓

(arrow down)

Cursor keys to navigate
Enter to select

Press corresponding button

Select the next higher connected channel

Next lower bank

ScrLk + ScrLk + PgUp

PgUp (w/ OSD Menu)

Press corresponding button on
that switch

Select the next lower bank (switch) when
with multiple daisy-chained units

Next higher bank

ScrLk + ScrLk + PgDn

PgDn (w/ OSD Menu)

Press corresponding button on
that switch

Select the next higher bank (switch ) when
with multiple daisy-chained units

Autoscan Beep Sound On/Off

ScrLk + ScrLk + B

Toggle on/off the beep sound for switching
confirmation while autoscanning

Define Hotkey Preceding
Sequence

ScrLk + ScrLk + H + (y)

y = SCROLL LOCK, CAPS, F12 or NUM LOCK

Main Menu/Setup/Hotkey

[ SCROLL LOCK, CAPS, F12 or NUM
LOCK]

Press and hold down last button
(Button 4 / Button 8 / Button 16)
till two beeps, release the button
and then press (y) key

Select the hotkey preceding sequence among
5 alternative keys

Load Default

Main Menu / Setup / Load Default

Restore all settings (Autologout, OSD
timeout, etc.) on all KVM switch to the
factory default
* This will not affect password

OSD Appearance

Main Menu / Setup /OSD
Appearance

Specify whether you want to keep or hide the
OSD menu after port switching operation.

Change Computer Name

Cursor keys to navigate
Enter (Ins) to select/edit

Change the computer name
[max. length = 8 alphanumeric characters]

Reset Console Mouse

ScrLk + ScrLk + End

Reset console mouse when mouse is locked
up

Show OSD Menu

ScrLk + ScrLk + (Space Bar)

Activate the OSD Menu on the console
screen

Autoscan

ScrLk + ScrLk + S

Autoscan through every connected channel
for quick screen browsing of each channel.

Stop Autoscan

Any key

Press any push button

Terminate Autoscan activity

Autoscan Period
[5 ~ 10 ~ 95 seconds]

Main Menu / Setup / Autoscan
period

Specify delay time within a range of 5 ~ 99
seconds [default = 10 sec ]

Auto Logout Timeout
Enable/Disable
[0 ~ 99 min ]

Main Menu / Setup / Auto Logout

Specify the time out for auto logout – screen
/keyboard/mouse locked after timeout
period for security. (default = 0 = disable)

OSD Menu Timeout
[0 ~ 60 ~ 95 seconds]

Main Menu / Setup / OSD Timeout

Specify the timeout for OSD menu
[default = 60 seconds; 0 = disable]

OSD Title Bar On/Off
[ON/OFF]

ScrLk + ScrLk + T

Enable/disable the OSD Title Bar
[default = ON]

OSD Title Bar Position
[Left/Right]

Main Menu / Setup / Title Bar

Select the OSD title bar position on your
screen

Setup Password

[Disable/Enable]

Main Menu / Setup / Setup
Password

Enable/disable password protection
[default == disable; password length <= 8
characters]

Notes:
1. OSD Menu control is only available when the OSD menu is activated on the screen. To activate the OSD menu, use the hotkey sequence ScrLk + ScrLk + (Space Bar). For detailed OSD operation
reference, please refer to the User Guide. When OSD Menu is active, the mouse will be locked until the OSD Menu is off. For detailed OSD function, please refer to previous OSD Menu section.
2. Note that a, b, y and z each denotes a number key. (ab) = 01 ~ 16 ; (yz) = 01 ~ 08. For example, ScrLk + ScrLk + 03 + 06 is for bank 3 port 6. When using a single KVM Switch configuration, the default
bank no. is 01, therefore hit ScrLk + ScrLk + 01 + 12 for port 12 for a single KVM Switch configuration.
3. The password is up to 8-character length. You should remember the password since it is required for access to your KVM switch once you enable the password protection for your KVM switch. However,
if you forget the password and thus are blocked from KVM access, you should contact your local dealer for tech support.

RoHS

Technical Support

E-mail:

[email protected]

Website: www.linkskey.com

This manual is related to the following products:

LKV-9308 LKV-9316