Chapter 3 connect switch to a terminal, Gigabit ethernet switch user manual – Linkskey LKS-SG2419 User Manual
Page 8
Gigabit Ethernet Switch User Manual
8
Chapter 3 Connect Switch to a Terminal
1. Connect the switch to a power outlet nearby using the included power cord. Make
sure the power supply accords with specified rating: 100-240V~ 50/60Hz.
Figure 6. Connect switch to a power outlet
2. Connect a
RJ45 port on the switch to the PC’s NIC port using an Ethernet cable.
Figure 7. Connect a PC to the switch