Linkskey LKS-SG9P4 - Manual (Page 9)

9-port Gigabit Ethernet Switch with 4-port PoE
7
2.4 Product Installation
Desktop Installation
Step 1: Set the bottom of the switch up on a flat and stable desktop.
Step 2: Paste four cushions in the corresponding concave places at the bottom.
Step 3: Turn over the switch and place it face up on the workbench.
Figure 2-1 Desktop Installation
Magnet Installation
Step 1: Attract 4 magnets into the corresponding round grooves on the bottom at
each corner of the switch’s housing.
Step 2: Use screws to secure the magnets to the switch’s housing, shown as
Figure 2-2 (a).
Step 3: Press the switch (installed with magnets) in a proper way on a stable
surface you select, shown as Figure 2-2 (b).
Figure 2-2 Magnet Installation