Linkskey LKS-SG9P4 - Manual (Page 3)

9-port Gigabit Ethernet Switch with 4-port PoE
1
Chapter 1 Introduction
1.1 Product Overview
The Linkskey LKS-SG9P4 Gigabit Ethernet with 4-port PoE Switch provides you
with an ideal seamless solution of high performance, low cost, easy-to-use, and
boosts your 10/100Mbps local area network to 1000Mbps. The switch supports
10/100/1000M auto-sensing, and protects the existing network investment when
you enjoy the gigabit network. The switch is plug-and-play with no configuration
required. Diagnostic LEDs which display link status and activity, allow you to
quickly detect and correct problems on the network. The LKS-SG9P4 also
provides four PoE-capable ports of the switch, up to 30W output power on each
port, which can solve the problems resulting from wiring complexities, high cost
and maintenance difficulties of network devices.
1.2 Package Contents
Open the package and verify the following items carefully. If any of the listed items
is damaged or missing, please contact your local reseller.
1 x LKS-SG9P4 Gigabit Ethernet Switch with 4-port PoE
1 x Power Adapter
1 x User Manual
1 x Magnet Kit (4 magnets and 4 screws)
4 x Rubber Foot Pad
2 x Screw Set
1 x Product Warranty Card
1.3 Physical Description
Front Panel
The front panel mainly consists of RJ45 ports and LEDs, shown as Figure 1-1.