Bang & Olufsen BeoVision 8-40 User Guide - Manual (Page 28)

Expand your setup
Information
Your TV supports a wide range of additional equipment.
Disconnect from the mains
While expanding your setup, the TV must be
disconnected from the mains.
Disconnect TV from mains Switch off TV
Connect additional equipment
To operate non-Bang & Olufsen products with
Beo4, attach a Bang & Olufsen IR-transmitter to
each product. See also p. 30.
Select settings in the
‘CONNECTIONS’ menu
Make the connections
Switch on the TV
Always attach covers before you connect the TV
to the mains.
Connect TV to mains supply Attach all connection covers Switch on TV
‘STANDBY OPTIONS’ Set the set-top box to switch off when you change source or when you switch off the TV. You can also choose that the
set-top box should always be switched on or that it should be switched on and off manually by means of the remote control.
Connect external set-top box
To get access to any channels you must connect
an external set-top box. Make sure you have a
21-pin cable, an adaptor and other required
equipment.
Select settings in the
‘CONNECTIONS’ menu
Connect set-top box
28